Operation
DeLaval voluntary milking system VMS
94897201.pdf2007-12-18
Attaching teatcups by hand on a
right-side-entry station
The procedures for a right-side-entry station
are the same as the ones for left-side-entry
station.
Follow the instructions on the previous
pages and use these pictures as guidance
when working with a right-side-entry station.
Note that the buttons for the front and rear
teats are placed differently on the touch
screen.
Teat attach and milking (right-side-entry station).
Support of milk tubes
Note: Ensure that the station is in manual
mode.
To hold the milk tubes, on the touch screen:
1. Press the VMS button in the top right
corner. This will display the VMS menu.
2. Press the Robot Control button.
65(198)
To Next Page
Loading...
