DeLaval VMS 2008 User Manual

Maintenance
DeLaval voluntary milking system VMS
94897201.pdf2007-12-18
E
F
E. Feeding module
F. Stall and floor
Cleaning of magazine, teatcups and
milk tubes
1. On the touch screen, press the VMS,
then Teatcup Magazine Service button.
2. Press the Release button for each
teatcup.
cd24759
Roller
Sealing collar
Splash guard
3. Clean the teatcups and the milk tubes
using water, mild cleaning detergent, and a
brush. Check the liners and tubes for
punctures or other damage.
4. Use the water hose to remove dirt from
rollers, sealing collars, nozzles and splash
guard.
5. Flush the teatcups and milk tubes with
water to remove the cleaning detergent.
6. Retract the teatcups back into the
magazine by pressing the Retract button for
each teatcup.
7. Check that the cords between the
retraction cylinders and the pulleys are tight
and not damaged or worn.
8. Press the Done Testing Teatcups IO
button to close the window.
111(198)

DeLaval VMS 2008 Specifications

General

Brand	DeLaval
Model	VMS 2008
Category	Farm Equipment
Language	English