Maintenance
DeLaval voluntary milking system VMS
94897201.pdf2007-12-18
Air supply switch
4. Shut the air to the stall (gates and
feeding module) and lower arm with the air
supply switch on the upper beam. The gates
can be opened by hand when the air supply
is shut.
For instructions, see the following sections
in the chapter "DeLaval voluntary milking
system VMS; Operation":
"Switching from automatic to manual mode".
"Deactivating the multi-purpose arm".
"Stall and feeding functions".
“Shutting off the compressed-air to the
gates”.
The following parts on the milking
station should be cleaned daily.
B
A
A. Magazine, teatcups and milk tubes
B. Teat preparation module
D
C
C. End effector
D. Camera window
110(198)
To Next Page
Loading...
Need help?
General
