Operation
DeLaval voluntary milking system VMS
94897201.pdf2007-12-18
Auto and manual window
4. In the Auto and manual window, press
the Auto button. The milking station will now
continue working in automatic mode.
Shutting off the milking station
VMS menu
Note: The milk lines are drained during
shutdown of the station. To transport
residual milk in the lines to the storage tank,
see the section "Emptying the receiver and
purging the milk lines" in this chapter.
On the touch screen:
1. Press the VMS button in the top right
corner. This will display the VMS menu.
2. Press the Shutdown VMS button and
confirm.
3. Wait a couple of seconds until the touch
screen is blank.
4. Turn the main switch on the VMS power
box into off position.
48(198)
To Next Page
Loading...
Need help?
General
