Operation
DeLaval voluntary milking system VMS
94897201.pdf2007-12-18
Switching between automatic and
manual mode
Switching from automatic to manual mode
or vice versa can be done at any point in
the milking procedure.
From automatic to manual mode: In this
case, the milking station will first finish
ongoing actions before it stops and changes
to manual mode.
If, for example, the working mode has
changed during teat preparation, this
procedure will first be completed before the
station stops and changes to manual mode.
From manual to automatic mode: In this
case, the milking station will carry on in
automatic mode from the step it has
reached in the milking sequence.
If, for example, the working mode has
changed during the main milking phase, the
station will continue with post-treatment
when the milking phase is complete. When
the cow leaves the station, the station will
be ready to receive another cow.
41(198)
To Next Page
Loading...
Need help?
General
