DeLaval VMS 2008 User Manual

Operation
DeLaval voluntary milking system VMS
94897201.pdf2007-12-18
Restarting the milking station
Note: The milk lines are drained during the
start-up of the station. To transport residual
milk in the lines to the storage tank, see the
section "Emptying the receiver and purging
the milk lines" in this chapter.
On the touch screen:
1. Press the VMS > Restart VMS buttons.
2. Confirm that you have decided to restart
the milking station.
Switching from manual to automatic
mode
Auto and manual window
1. Press the Auto button at the top of the
touch screen to display the Auto and
manual window. (The Auto button has no
cross beside if the station is in manual
mode.)
2. In the Auto and manual window, press
the Auto button.
Switching from automatic to manual
mode
1. Press the Auto button at the top of the
touch screen to display the Auto and
manual window. (The Auto button has a
cross beside if the station is in automatic
mode.)
2. Press the Manual button.
49(198)

DeLaval VMS 2008 Specifications

General

Brand	DeLaval
Model	VMS 2008
Category	Farm Equipment
Language	English