Operation
DeLaval voluntary milking system VMS
94897201.pdf2007-12-18
Determining individual teat positions
Cow in right-side-entry station.
Cow in left-side-entry station.
1. Follow the steps 1 to 9 in the previous
section.
2. Press the Teach Teat Pos. button for the
teat whose position you have decided to
determine.
3. Follow the instructions on the touch
screen and the sub-steps for step 11 on the
previous page.
Note: Determining all teat positions at the
same time is the recommended method.
If you determine the position of a rear teat,
for example number 3, re-determining the
position of the corresponding front teat is
recommended, in this case number 1.
89(198)
To Next Page
Loading...
Need help?
General
