Troubleshooting
DeLaval voluntary milking system VMS
94897201.pdf2007-12-18
The following major error codes exist:
1 - Milking Station (Mumgr): main program
in the milking station; handles its overall
operation.
2 - Robot: program that handles the
operation of the multi-purpose arm.
3 - Milking: program that handles the milking
process.
4 - Cow traffic: programs that handles the
gates of the milking station and the
filter/separation gates.
5 - Milk transport: program that handles the
transportation of milk from milking station to
tank.
6 - VMS I/O-man: program that handles
communication and data transmission within
the milking station as well as components
connected to it (except the PC).
7 - Cleaning unit: program that operates the
plant cleaning unit.
9 - Programs that handle the data
communication between the milking station
and the PC.
12 - Milk refrigeration: programs that
operate or communicate with milk tanks and
cooling equipment. The VMS system can
transfer and issue alarms from milk tanks of
other brands than DeLaval, but might not be
able specify them clearly.
Types of alarms
VMS alarm messages are classified into the
following four groups:
• Status message: information about
normal actions that take place during
operation. These messages can be
viewed in the status window of the
management software, or in the event list
on the touch screen.
• Deviation: minor errors that might impair
operation slightly. Automatic correction
will be reported in the status window of
the management software or in the event
list on the touch screen.
• User notification: errors that eventually
154(198)
To Next Page
Loading...
Need help?
General
