Maintenance
DeLaval voluntary milking system VMS
94897201.pdf2007-12-18
Milk refrigeration
1
3, 4, 7
5
6
8
9
2
Maintenance of refrigeration equipment
such as storage tanks or condensing units
depends on the choice of products, which
can be delivered by DeLaval or other
suppliers. The maintenance schedule below
refers to “Closed tanks, DX cooling tank
with Hygenius”.
If the system uses DeLaval Instant cooling,
additional maintenance should be
performed on “P30 Clip-on”, the plate cooler
on the receiver unit.
For instructions and further information, see
the manual that came with the product.
Check point Maintenance
intervals (monthly)
Maintenance
intervals
(quarterly)
Maintenance intervals
(yearly)
Check point Maintenance
intervals (monthly)
Maintenance
intervals
(quarterly)
Maintenance intervals
(yearly)
1. Clean the detergent
container and the caps.
X1. Clean the detergent
container and the caps.
X
2. Clean the air vent. X2. Clean the air vent. X
3. Clean the grey cap and
rubber plate double outlet.
X3. Clean the grey cap and
rubber plate double outlet.
X
4. Clean the nut and blind
liner double outlet.
X4. Clean the nut and blind
liner double outlet.
X
5. Clean the manhole ring. X5. Clean the manhole ring. X
6. Clean the exterior of the
tank.
X6. Clean the exterior of the
tank.
X
7. Clean the black cap
double outlet.
X7. Clean the black cap
double outlet.
X
8. Clean the non-return
valve.
X8. Clean the non-return
valve.
X
9. Clean the condensing unit.* X9. Clean the condensing unit.* X
133(198)
To Next Page
Loading...
Need help?
General
