Safety precautions
DeLaval voluntary milking system VMS
94897201.pdf2007-12-18
————————————————————
Warning: Use of controls, adjustments or
performance of procedures other than those
specified herein may result in hazardous
radiation.
————————————————————
Safety during maintenance and
service
————————————————————
Warning: Service should only be carried
out by personnel with the proper training
and authorisation. This concerns all parts of
the system.
————————————————————
————————————————————
Main
switch
VMS power box
Danger: Always shut down the milking
station and switch off the electrical power
supply (by turning the main switch
anti-clockwise) before service or repair of
the electrical system is carried out. Use
appropriate lockout/tagout procedures to
make sure that the power is not switched on
without your knowledge.
————————————————————
Note: Use the touch screen to shut down
the milking station. The programs executed
in the milking station will then be terminated
properly.
————————————————————
Service mode Working mode
Warning: To avoid the risk of being injured
by moving parts on the milking station,
always set the service switch to service
mode before entering the working range of
the milking station.
————————————————————
11(198)
To Next Page
Loading...
Need help?
General
