Operation
DeLaval voluntary milking system VMS
94897201.pdf2007-12-18
Determining cup and start
positions
General principle
The letters A, B, C etcetera in the joystick
picture corresponds to the same letters in
the left-side-entry station and
right-side-entry station pictures. The joystick
is a two-hand-operation device. This means
that the safety button on the back of the
joystick must be pressed (half way in) to
enable the multi-purpose arm to move and
to make it possible to use the positioning
buttons on the front. This is the case
whenever you want to move the
multi-purpose arm with the service switch in
service mode, also when not determining
positions.
79(198)
To Next Page
Loading...
