Safety precautions
DeLaval voluntary milking system VMS
94897201.pdf2007-12-18
Note: External cleaning of the milking
station should be carried out three times a
day. Dirt, dust and feed residues can attract
bacteria and insects. Parts that should
receive special attention are the manger,
rear plate, the teatcups and the teat
preparation cup.
————————————————————
Warning: Even if the station is in manual
mode, be careful when cleaning parts that
can move such as the feeding module, the
rear plate, the magazine, and the gates.
You may become seriously injured.
————————————————————
————————————————————
Membrane valves at the
storage tank(s).
Warning: Never use your fingers directly
when carrying out external cleaning of the
VMS system, for example when cleaning
the membrane valves at the storage tank(s)
and the milking station. Use a brush instead
to avoid hurting your fingers or harming your
skin with detergents.
————————————————————
————————————————————
Warning:The cleaning containers gets hot
during cleaning. Allow to cool before service.
————————————————————
15(198)
To Next Page
Loading...
