General description
DeLaval voluntary milking system VMS
94897201.pdf2007-12-18
Vacuum supply
The VMS is connected to the vacuum
supply system. In some VMS configurations
up to three milking stations uses the same
vacuum pump. To regulate the maximum
vacuum consumption of each VMS, a flow
regulating valve (FRV) is installed in the
vacuum supply system. This is to ensure a
sufficient vacuum to each VMS.
Pulsators
Alternates the vacuum level in the teatcup
chamber so that the liner opens and closes.
Air inlet housing
A 401A 402
A 403
A 404
A 621
A 622
FG
Air inlet housing
27(198)
To Next Page
Loading...
Need help?
General
