Figure 70. Installing the PERC card into PERC tray
4. Insert the battery tab into the battery holder and ensure the battery that it is firmly seated.
Figure 71. Installing the battery into the battery holder
5. Align and connect the PERC power cable to the PERC card.
6.
NOTE: Route the PERC cable into the PERC tray cable holder.
Tilt the battery holder assembly to align the tabs with the PERC tray.
7. Press the battery holder assembly on to the PERC tray.
8. Connect the battery power cable to the front PERC card.
NOTE: Route the battery cable into the front PERC shroud cable holder.
104 Installing and removing system components
To Next Page
Loading...
