Appendix B Accessories|
B-22 Revision Jan. 2009, 06EE, SW--PW V1.12/CTL V2.12
Display Message Descriptions
Displays the actual stored value of the selected parameter.
External Fault.
Display “End” for approximately 1 second if input has been accepted by
pressing
key. After a parameter value has been set, the new value
is automatically stored in memory. To modify an entry, use the
and
keys.
Display “Err”, if the input is invalid.
NOTE
When the setting exceeds 99.99 for those numbers with 2 decimals (i.e. unit is 0.01), it will only
display 1 decimal due to 4-digital display.
To Next Page
Loading...
