ineo+ 650/550/451 2-101
Copy Operations
2
3 Touch [Application], and then touch [Sheet/Cover/Chapter Insert].
– For details on using thick paper for the cover sheets and on loading the paper, refer to "Paper types
and paper capacities" on page 2-80 and "Loading paper into the bypass tray" on page 2-22.
– To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
The Sheet/Cover/Chapter Insert screen appears.
4 Touch [Cover Sheet].
The Cover Sheet screen appears.
5 Select the desired cover page settings.
– To cancel the setting and select the default, press the [Reset] key.
– To cancel the "Cover Sheet" function, touch [No].
– The default setting for the paper tray loaded with cover pages can be specified from the Utility
mode.
To Next Page
Loading...
