ineo+ 650/550/451 3-15
Print Operations
3
Chapter
You can specify the page you want to print on the front side when duplex printing or booklet printing.
Even if a specified page comes up to be printed on the back side in duplex printing or booklet printing, the
specified page is moved and printed on the front side.
1 Click the Layout tab.
2 Select the "Chapter" check box.
3 Enter the page number of the page you want to print on the front side.
2
Note
When entering multiple page numbers, separate the page numbers with commas such as "2, 4, 6" or
enter a page range using a hyphen such as "6-10".
The "Chapter" check box can only be selected when the duplex printing or the booklet printing setting
is enabled.
Specifying duplex/booklet printing
You can print a document onto both sides of a page or in a booklet format (two facing pages). This comes in
handy when you want to bind multiple-page documents.
1 Click the Layout tab.
2 From the "Print Type" drop-down list, select "2-Sided" or "Booklet".
2
Note
The binding position can be specified from the "Binding Direction" drop-down list.
Setting the binding margin
Binding margins are added to the document before it is printed.
1 Click the Layout tab.
2 From the "Binding Direction" drop-down list, select the binding position.
3 Select the "Binding Margin" check box.
To Next Page
Loading...
