5
Network Scanner Operations
5-78 ineo+ 650/550/451
6 Select a destination type, and then select the destination to be registered.
7 Touch [OK].
8 Touch [Close].
9 Touch [OK].
The Group destination is registered.
!
Detail
To check a registered destination, select it, and then touch [Check Job Set.].
To change the settings for a registered destination, select it, and then touch [Edit].
To delete a registered destination, select it, and then touch [Delete].
2
Note
The registration cannot be completed if no settings are specified for "Name" and "Destination".
To cancel the registration, touch [Cancel].
To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the Utility
mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or Box mode appears.
To Next Page
Loading...
