ineo+ 650/550/451 2-33
Copy Operations
2
9 Press the [Start] key.
Scanning begins.
10 Position the second page or second side of the document onto the original glass, and then press the
[Start] key.
– To scan the remaining pages in the document, repeat step 10.
– To change the scanning settings, touch [Change Setting].
– The buttons that appear in the screen for changing the settings differ depending on the specified
settings. Settings for the following can be changed.
1-Sided/2-Sided, Binding Position, Zoom, Frame Erase, Center Erase Original Size
– To cancel changes to the settings, touch [Cancel].
11 After all document pages have been scanned, touch [Finish].
To Next Page
Loading...
