EasyManuals Logo

DEWESOFT SIRIUS Series User Manual

DEWESOFT SIRIUS Series
336 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #146 background imageLoading...
Page #146 background image
/
SIRIUS
®
TECHNICAL REFERENCE MANUAL
5.7.1. General counter specifications
Counter
Timebase
102.4 MHz
Time base accuracy Typical
5 ppm, Max: 20 ppm
Max. Bandwidth
10 MHz
Input Filter
500 ns, 1 μs, 2 μs, 4 μs, 5 μs and 7.5 μs
Input Level Compatibility
TTL (Low: <0.8 V, High >2 V)
Input Impedance
100 pull-up to +3.3 V
Input Protection
±25 Volt continuous
Alarm output
Open collector, max. 100 mA / 30 Volt
Sensor supply
5 V / 100 mA; 12 V / 50 mA
Warning
Be careful with voltages >25 VAC or >35 VDC! These voltages are already high enough in order to
get a perilous electric shock by touching the wiring.
Caution
GND of the counter input is connected to the GND of the analog channel.
Caution
For ACC+, CHG+ channels GND of the counter input is connected via a 50 Ω resistor to In- of the
analog channel.
SIRIUS
®
V20-1 146 / 336

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DEWESOFT SIRIUS Series and is the answer not in the manual?

DEWESOFT SIRIUS Series Specifications

General IconGeneral
CategoryData Loggers
ManufacturerDEWESOFT
SeriesSIRIUS
Resolution24-bit
InterfaceUSB, EtherCAT
SoftwareDEWESoft X
ChannelsExpandable
Sampling RateUp to 200 kS/s per channel
Input TypesVoltage, Current, IEPE, Strain, Thermocouple, RTD, Resistance, Digital, Counter
Input Voltage Range±10 V, ±200 V
IsolationChannel-to-channel and channel-to-ground
ConnectivityEthernet, USB
Operating Temperature-10 °C to +50 °C
Storage Temperature-20 °C to +70 °C
Power Supply10 to 30 V DC
DimensionsVaries depending on module configuration
WeightVaries depending on module configuration
Analog InputsYes, depending on module configuration

Related product manuals