DEWESOFT SIRIUS Series

/
SIRIUS
® 
TECHNICAL REFERENCE MANUAL 


4.4. Connectors 
4.4.1. General 
4.4.1.1. USB Connector 
USB connectors are used by: 
● SIRIUS® measurement slices to transfer the measurement data to the SBOX (or PC) 
● SIRIUS® SBOX: to connect SIRIUS® USB slices or other USB devices. The USB connector can               
transfer data and provide power to connected devices (5 VDC) 

SIRIUS® SBOX: to connect SIRIUS® USB slices or other USB devices. The USB connector can transfer                
data and provide power to connected devices (5 VDC) 

USB 2.0 has a maximum signalling rate of 480 Mbit/s (High Speed or High Bandwidth). 
The Illustrations to the right show a Mini and Standard size USB 2.0 sockets. 




USB 2.0 Mini 
2x USB 2.0  
USB 3.0 "SuperSpeed" has backwards-compatible plugs, receptacles, and cables. 
SuperSpeed plugs and receptacles are identified with a distinct logo and blue inserts in standard format                
receptacles. 

Hint 
DEWESoft® USB cables have thumb screws to the right and left of the connector so that you can                  
firmly secure the USB cable. 

2x USB 3.0  
SIRIUS
®
V20-1 45 / 336  