/
SIRIUS
®
TECHNICAL REFERENCE MANUAL
5.6. SIRIUS® Waterproof specifications
SIRIUSiwe-6xSTGM-2xSTGM+
8 ch voltage
Full / half / quarter bridge strain
16 ch voltage
Full / half / quarter bridge strain
8 ch voltage
Full bridge strain, current (ext.
Shunt)
2x 24-bit delta-sigma
DUALCOREADC®
with anti-aliasing filter
24-bit delta-sigma
with anti-aliasing filter
2x 24-bit delta-sigma
DUALCOREADC®
with anti-aliasing filter
Simultaneous 200 kS/sec
Simultaneous 200 kS/sec
Simultaneous 200 kS/sec
Sampling rate on EtherCAT®
±10 V, ±1 V, ±100 mV, ±10 mV
±10 V, ±1 V, ±100 mV, ±10 mV
±200 V, ±10 V, ±1 V, ±100 mV
2 mV/V ... 1000 mV/V, free
programmable
2 mV/V ... 1000 mV/V, free
programmable
2 mV/V ... 1000 mV/V, free
programmable
DC, AC 1 Hz (3 Hz, 10 Hz per SW)
200 V Range: 1 MΩ;
all other ranges 10 MΩ
between IN+ or In- against
GND
Full / Half / Quarter Br 120 / 350
Ω 3-wire; internal bridge
completion
Full / Half / Quarter Br 120 / 350
Ω 3-wire; internal bridge
completion
Internal shunt resistor
100 kΩ, bipolar to Exc+ or Exc-
(others on request)
100 kΩ, bipolar to Exc+ or Exc-
(others on request)
0 - 15 VDC bipolar
software programmable
(16-bit DAC), max 44 mA
0 - 12 VDC bipolar
software programmable
(16-bit DAC), max 44 mA
0 - 24 V DC unipolar
2 - 30 V DC bipolar
software programmable
(16-bit DAC), max 200 mA / 2 W
Supported, DSI® adapters
Supported, DSI® adapters
Supported, DSI® adapters
IN+ to IN-: 50 V continuous; 200
V peak (10 msec)
IN+ to IN-: 50 V continuous; 200
V peak (10 msec)
200 V Range: 300 V;
all other ranges: 100 V (250 V
peak for 10 msec)
2x Supercounter® (6 Digital In,
2 Digital out)
2x Supercounter® (6 Digital In,
2 Digital out)
1000 V channel-channel,
channel-ground
Differential (ground loop
isolated)
1000 V channel-channel,
channel-ground
DSUB-9
CNT: 7-pin LEMO female
DSUB-9
CNT: 7-pin LEMO female
Typ. 14 W (Max. 42 W,
temperature derating applies)
60 g @ 6 ms 50x, half sine, all axis
SIRIUS
®
V20-1 143 / 336