DEWESOFT SIRIUS Series User Manual

/
SIRIUS
® 
TECHNICAL REFERENCE MANUAL 


8.2.1.2. Clock 
A clock signal is a particular type of signal that oscillates between a high and a low state and is utilized                     
like a metronome to coordinate actions. 

Hint 
Each SIRIUS® chassis has an internal clock. The sampling of the data-points is always correlated               
to this clock – so that the data-points of all channels (on all modules) refer to the same point in                    
time. 

Important 
Please see chapter “General Specification“ and “Time base accuracy” specification in the            
corresponding table! 



 
SIRIUS
®
V20-1 312 / 336  

DEWESOFT SIRIUS Series Specifications

General

Category	Data Loggers
Manufacturer	DEWESOFT
Series	SIRIUS
Resolution	24-bit
Interface	USB, EtherCAT
Software	DEWESoft X
Channels	Expandable
Sampling Rate	Up to 200 kS/s per channel
Input Types	Voltage, Current, IEPE, Strain, Thermocouple, RTD, Resistance, Digital, Counter
Input Voltage Range	±10 V, ±200 V
Isolation	Channel-to-channel and channel-to-ground
Connectivity	Ethernet, USB
Operating Temperature	-10 °C to +50 °C
Storage Temperature	-20 °C to +70 °C
Power Supply	10 to 30 V DC
Dimensions	Varies depending on module configuration
Weight	Varies depending on module configuration
Analog Inputs	Yes, depending on module configuration