DEWESOFT SIRIUS Series

/
SIRIUS
® 
TECHNICAL REFERENCE MANUAL 


Name 
Description 
EXT CAL 
R8 system features (optional) cal reference input. External calibration 
reference can be connected via single BNC connector on the rear side 
of the R8 and can be switched in the software to all input channels at 
once to check the amplifier performance and accuracy. 
AO 1 to 8 
8x BNC connectors per slice (optional) 
Up to 64 analog outputs 
EtherCAT IN 
EtherCAT® slave port (optional) 
8-pin LEMO male connector 
EtherCAT OUT 
EtherCAT® slave port (optional) 
8-pin LEMO female connector 

Important 
See chapter “EtherCAT® slave port” for details. 

 
SIRIUS
®
V20-1 93 / 336  