99
3.5 Auto Job Operation Program
This function is to show operator the next task in counting operation. Operator can
complete the counting operation along with display indication with this function.
The remarkable merits of this function are;
• Operator can execute each task by pressing [ENTER] key.
• All operator can complete counting operation without skipping required tasks.
• Operation process can be programmed up to 5 patterns. And, a pattern can be
assigned to each of shipping, receiving, non-add operations of each ID code.
3.5a Programmable task
Ref. # Tasks
A Lot No. Entry by pressing Numeric keys or scanning.
B Parts No. Entry by pressing Alpha-numeric keys or scanning.
C Tare Entry by pressing Numeric keys, scanning, or one touch tare
D Unit Weight Entry by sampling.
E Unit Weight Entry by Pressing Numeric keys.
F Counting task.
G Quantity Entry by pressing Numeric keys.
H Label Printing.
I Escaping from Auto Job Operation Mode
J Back to the 1st task in Auto Job Operation.
3.5b Default Setting
Pattern No. Task Reference #.
A B C D E F G H I J
1
{ { { {
{
{
{
2
{ { { {
{ {
{
3
{
{ {
{
{
4
{ {
{ {
{
5
{ {
{ {
{
Note 1) The last step of each operations should be “I” or “J”
To Next Page
Loading...
Need help?
General
