18
2.1b Data Files and Function List
The main data listed below is programmed in Program Mode.
Chapter #
Data File Remarks
2.2 I.D. Code File Programming ID code data in Memory
2.3 Date / Time Setting the internal clock.
2.4 Set Point Output File Programming Set Point value.
2.5 Title Contents File Programming text massage (title) on formats.
2.6 Preprint data File Programming text and position of Pre-print data.
2.7 Copy Format Function Copying a standard format to Free format.
2.8 Free Format File Programming Free format.
2.9 Shelf Location Format File Programming Shelf Location Format.
2.10 Shelf Location Limit File Setting Shelf Location Limit.
2.11 Address Data File Setting Address data.
To Next Page
Loading...
Need help?
General
