65
2.11 Address Contents Setting
Address data can be printed on a label which have printing area for address contents.
The data can be called in Operation Mode from the different data base from ID coode.
Address Contents can be programmed up to 10 (files) patterns. Also, the data base of
one file has 5 lines (32 characters/line) You can select address file no. on calling ID
code in OPR mode.
2.11a Programming Operation
1. Enter Program Mode and select Address
Contents.
PRG : ADDRESS CONTENTS
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
2. Depress [ENTER] key.
A.C = FILE NO. 1
♦♦♦♦
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
♦ = Blinking Cursor
3. Select file no. by pressing [ + ] or [ - ] key.
Ex.) File No. = 3
A.C = FILE NO. 3
♦♦♦♦
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
♦ = Blinking Cursor
4. Press [ENTER] key.
F3 = ADDRESS NO. 1
♦♦♦♦
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
♦ = Blinking Cursor
5. Select address no. by pressing [ + ] or [ - ]
key. Ex.) Address no. = 1
F3 = ADDRESS NO. 1
♦♦♦♦
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
6. Press [ENTER] key.
3.1 =
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
To Next Page
Loading...
