Digi DC-150 - Shelf Location Label Setting; Label Size; Programmable Item Data for Shelf Location Label; Data Type

58
2.9 Shelf Location Label Setting
To konw the location of stock, each item code can be assigned shelf location number.
DC-150 can print the shelf location label for each item code in CHECK MODE to put on
the shelves where the stock is stored.
DC-150 has no standard format, use one free format for this shelf location label. The
label format is to be developed with the same programming steps as free format.
2.9a Label Size
You can select label size from 11 size in Address 34, which is in common with label size
of free format. (Ref. to 2.8.a Label Size in Free Format Setting)
2.9b Programmable Item Data for Shelf Location Label
This chart shows the data type in setting each Item data.
PRINTING FACTORS DATA BASE
ID CODE TYPE 1
PARTS NO. TYPE 2
PARTS NAME TYPE 2
UNIT WEIGHT TYPE 1
LOCATION NO. TYPE 1
THRESHOLD TYPE 1
DATE TYPE 1
TIME TYPE 1
BAR-CODE (ID) TYPE 3
BAR-CODE (PARTS NO.) TYPE 3
TITLE CONTENTS NO.1 ~ 16 TYPE 1
2.9c Data Type
The data type of item data on shelf location label is the same as free format.
(Refer to 2.8.c Data Type in Free Format Setting)
All manuals and user guides at all-guides.com