Digi DC-150 - Detection Level Programming

95
pressing [ENTER] key.
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7
8
4. Adjust the feed value with [ + ] and [ - ] key.
Ex) + 2
F
EED VALUE = + 2
♦♦♦♦
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7
8
5. Exit the FEED VALUE setting Mode by
pressing [AUTO/MANUAL] key.
ADJ = FEED VALUE
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7
8
3.4b Detection Level Programming
This option is to control the sensitivity of the gap sensor, which is used to locate the
space between labels. The value will be adjusted automatically on feeding label out.
If the sensor cannot detect the gap between labels, use this option to adjust the label
present to the proper value for printing.
LEVEL ( 2 8) = 0
♦ ♦ ♦ ♦
• • • • • • • • • • • • • • • • • • • •
Z S T K 1 2 3 I R M I O 1 2 3 4 5 6 7
8
Detection level
Key Functions : [ + ] key is used for the increment of detection level. (Max = +127)
[ - ] key is used for the decrement of detection level. (Max = -127)
[→ (feed )] key is used for feeding label to check the proper value.
Programming Detection Level
1. Select Print Adjustment Mode in
Maintenance Mode by depressing [TARE←]
MEN: PRINT ADJUSTMENT
or [U.W→] keys.
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7
All manuals and user guides at all-guides.com
all-guides.com