43
2.8 Free Format Setting
DC-150 has 7 types of standard format, so that the suit label format for the system can
be used. Moreover, in the case that any types of standard format is not suit for what
required, “FREE FORMAT” can create your own label (item label, total label, and gross
label) by setting up printing angle, direction and size of the print items.
Accroding to the usage of the machine, DC-150 can print 3 types of labels: ITEM
LABEL, TOTAL LABEL and GROSS LABEL. The data base of one label format has all
3 type of labels. When you make a new label format, the format data for Item, Total,
and Gross labels are saved as one data base.
In Free Format Set Up
• 2 Free Format can be programmed.
• One item label, total label and gross label are avaialble to be set for each Free
Format number.
• Label size should be pre-set in Maintenance Mode.
2.8a Label Size
You can select label size from 11 size in Address 34 (PRINT SPEC)
64 x 40, 64 x 55, 64 x 77.5, 64 x 92, 64 x 120, 40 x 23, 40 x 28, 40 x 46, 40 x 62.5, 40 x
77.5, 40 x 92
To Next Page
Loading...
Need help?
General
