60
3. Depress [ENTER] key.
S.L = PRINT ANGLE
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
4. Depress [ENTER] key.
S.L = ANGLE (°) 0
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
5. Select label angle by depressing
[ + ] or [ - ] key.
S.L = ANGLE (°) 0
Ex.) Angle = 0
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
6. Depress [ENTER] key.
(Ready for setting the print positions for item
S.L = ID CODE
data)
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
7. Select item data by depressing
[UNIT WEIGHT←] or [TARE→] key.
S.L = PART NAME
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
Set Print Items in the procedure in 2.8I Item setting in Free Format Setting.
8. Store the data by pressing [ENTER] key.
PRG : S. LOCATION LABEL
. . . . . . . . . . . . . . . . . . . .
Z S N K 1 2 3 I R M I O 1 2 3 4 5 6 7 8
Note:) While programming print data, the programmed data may be printed in test label.
With uins this function, you can check if the print position is proper and adjust the
data accordingly.
♦ [ SP kg/lb ] key ...... Test Printing of Shelf Location Label
To Next Page
Loading...
