Digi DC-150 - Page 81

80
SPEC 38: Print In-Count (Receiving) on Threshold Report
(This SPEC actives only when SPEC 30 of REPORT SPEC is set to “SELECT”)
Y:
Allow
N:
Inhibit
SPEC 39: Print Tare Weight on Threshold Report
(This SPEC actives only when SPEC 30 of REPORT SPEC is set to “SELECT”)
Y:
Allow
N:
Inhibit
SPEC 40: Print Set Point on Threshold Report
(This SPEC actives only when SPEC 30 of REPORT SPEC is set to “SELECT”)
Y:
Allow
N:
Inhibit
SPEC 41: Print Selected scale no. on Threshold Report
(This SPEC actives only when SPEC 30 of REPORT SPEC is set to “SELECT”)
Y:
Allow
N:
Inhibit
SPEC 42: Print Auto Job No. for shipping operation on Threshold Report
(This SPEC actives only when SPEC 30 of REPORT SPEC is set to “SELECT”)
Y:
Allow
N:
Inhibit
SPEC 43: Print Auto Job No. for receiving operation on Threshold Report
(This SPEC actives only when SPEC 30 of REPORT SPEC is set to “SELECT”)
Y:
Allow
N:
Inhibit
SPEC 44: Print Auto Job No. for Non-add operation on Threshold Report
(This SPEC actives only when SPEC 30 of REPORT SPEC is set to “SELECT”)
Y:
Allow
N:
Inhibit
All manuals and user guides at all-guides.com
all-guides.com