EasyManuals Logo

DigiDesign D-show User Manual

DigiDesign D-show
229 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
D-Show Guide96
Expander/Gate Meter
The Expander/Gate meter works differently depending on
which mode the strip is in. The meter is in Gate mode when
the ratio is set to its maximum setting (100:1).
Gate When the Gate function is selected, the 3 LEDs on the
Expander/Gate meter show the following:
Expander When the Expander function is selected, the 3 LEDs
on the Expander/Gate meter show gain reduction levels from
right to left, according to the following scale:
Bank Clip Indicators
The Bank Clip LED at the top of Input Channel and FX Return
channel strip lights when clipping occurs on a hidden fader
bank. The channel position of the Bank Clip indication corre-
sponds to the position of the off-bank channel. The Bank Clip
LED flashes to indicate momentary clips, and lights solid for
sustained clipping.
To locate the clipped channel:
Press the Channel Bank switches until the Channel Input
Level meters show clipping.
For more information on clip indication, see “Metering Op-
tions” on page 99.
Stereo LED
The Stereo LED on Channel Input Level meters lights to indi-
cate stereo channels. A flashing Stereo LED indicates there is
an offset in level between left and right signals of 12 dB or
more.
ACS Section Dynamics Meters
The three dynamics gain reduction meters in the ACS section
show gain reduction for the built-in Compressor/Limiter, the
built-in Expander/Gate, and any applicable Dynamics plug-in
on the selected channel.
On each meter, the 10 LEDs show dynamics gain reduction
from right to left, according to the following scale:
Channel Expander/Gate meter
Gate status
LED Status Color
1 (right) Gate open Green
2 Gate in hold Yellow
3 (left) Gate closed Red
Expander gain reduction meter scale
LED Gain Reduction Color
(none) 0 dB (none)
1 (right) 3 dB Green
2 20 dB Yellow
3 (left) > 20 dB Red
Channel Expander/Gate
gain reduction meter
ACS dynamics gain reduction meters
ACS gain reduction meter scale
LED Gain Reduction Color
(none) 0 dB (none)
1 (right) 3 dB Green
26 dB Green
39 dB Green
4 12 dB Green
5 15 dB Green
6 21 dB Green
7 24 dB Yellow
8 30 dB Yellow
9 40 dB Yellow
10 (left) 60 dB Red

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DigiDesign D-show and is the answer not in the manual?

DigiDesign D-show Specifications

General IconGeneral
BrandDigiDesign
ModelD-show
CategoryMusic Mixer
LanguageEnglish

Related product manuals