Dodge Intrepid User Manual

INTRODUCTION
TABLE OF CONTENTS
page page
BODY CODE PLATES
DESCRIPTION ..........................1
FASTENER IDENTIFICATION
DESCRIPTION ..........................3
FASTENER USAGE
DESCRIPTION
DESCRIPTION - FASTENER USAGE ........6
DESCRIPTION - THREADED HOLE REPAIR . . 6
INTERNATIONAL VEHICLE CONTROL &
DISPLAY SYMBOLS
DESCRIPTION ..........................6
METRIC SYSTEM
DESCRIPTION ..........................7
TORQUE REFERENCES
DESCRIPTION ..........................9
VEHICLE IDENTIFICATION NUMBER
DESCRIPTION .........................10
VEHICLE SAFETY CERTIFICATION LABEL
DESCRIPTION .........................11
E-MARK LABEL
DESCRIPTION .........................11
VECI LABEL
DESCRIPTION .........................11
MANUFACTURE PLATE
DESCRIPTION .........................12
BODY CODE PLATES
DESCRIPTION
LOCATION AND DECODING
The Body Code Plate (Fig. 1) is located in the
engine compartment on the battery tray front side
(Fig. 2). There are seven lines of information on the
body code plate. Lines 4, 5, 6, and 7 are not used to
define service information. Information reads from
left to right, starting with line 3 in the center of the
plate to line 1 at the bottom of the plate.
BODY CODE PLATE LINE 3
DIGITS 1, 2, AND 3
Paint procedure
DIGIT 4
Open Space
DIGITS 5 THROUGH 7
Primary Paint (Refer to 23 - BODY/PAINT - SPEC-
IFICATIONS).
DIGIT 8 AND 9
Open Space
DIGITS 10 THROUGH 12
Secondary Paint
DIGIT 13 AND 14
Open Space
DIGITS 15 THROUGH 18
Interior Trim Code
DIGIT 19
Open Space
Fig. 1 BODY CODE PLATE
1 - PRIMARY PAINT
2 - SECONDARY PAINT
3 - VINYL ROOF
4 - VEHICLE ORDER NUMBER
5 - CAR LINE SHELL
6 - PAINT PROCEDURE
7 - ENGINE
8 - TRIM
9 - TRANSMISSION
10 - MARKET
11 - VIN
LH INTRODUCTION 1

Dodge Intrepid Specifications

General

Brand	Dodge
Model	Intrepid
Category	Automobile
Language	English