EXHAUST MANIFOLD
DESCRIPTION
Both manifolds are a log style made of ductile cast
iron (Fig. 130). The outlets are designed for V-Band
clamp attachment of close coupled catalytic converters.
Fig. 129 LOWER INTAKE MANIFOLD TIGHTENING
Fig. 130 EXHAUST MANIFOLD
1 - BOLT - HEAT SHIELD
2 - HEAT SHIELD
3 - GASKET
4 - EXHAUST MANIFOLD
5 - BOLT - EXHAUST MANIFOLD
6 - HEAT SHIELD
9 - 164 ENGINE 3.5L LH
INTAKE MANIFOLD - LOWER (Continued)
To Next Page
Loading...
