Dodge Intrepid User Manual

• Transmission Control Module
• Powertrain Control Module
• Travel Module
• SKIM
SYSTEM DIAGNOSIS
OPERATION
The PCM can test many of its own input and out-
put circuits. If the PCM senses a fault in a major
system, the PCM stores a Diagnostic Trouble Code
(DTC) in memory.
For DTC information see On-Board Diagnostics
(Refer to 8 - ELECTRICAL/ELECTRONIC CON-
TROL MODULES/POWERTRAIN CONTROL MOD-
ULE - DESCRIPTION).
TORQUE MANAGEMENT
OPERATION
The PCM receives the torque management input
from the transmission control module. The PCM
receives the input when the transmission shifts
gears. In response, the PCM shuts off a number of
fuel injectors when the transmission shifts gears.
SPECIFICATIONS
TORQUE
DESCRIPTION N·m Ft. Lbs. In. Lbs.
Camshaft Position Semsor 12 8.8 105
Crankshaft Position
Sensor Mounting Bolts
12 8.8 105
Engine Coolant
Temperature Sensor
28 20
Idle Air Control Motor—
2.7L
5.5 49
Idle Air Control Motor—
3.5L
7.3 65
Knock Sensor bolt—3.5L 10 7 88.5
Knock Sensor—2.7L 10 7 88.5
Manifold Tuning
Valve—3.5L
11.9 105
MAP Sensor—2.7L 4.5 40
MAP Sensor—3.5L 4 35
Oxygen Sensor 28 20
Powertrain Control Module 4 35
Throttle Body Mounting 11.9 105
Throttle Position
Sensor—2.7L
5.1 45
Throttle Position
Sensor—3.5L
6.2 55
Short Runner Valve 6.7 60
Fuel Rail Bolts—2.7L 12 8.8 106.2
Fuel Rail Bolts—3.5L 28 20.6 250
LH FUEL INJECTION 14 - 23
FUEL INJECTION (Continued)

Dodge Intrepid Specifications

General

Brand	Dodge
Model	Intrepid
Category	Automobile
Language	English