(11) Install timing belt covers. (Refer to 9 -
ENGINE/VALVE TIMING/TIMING BELT / CHAIN
COVER(S) - INSTALLATION)
(12) Install crankshaft vibration damper. (Refer to
9 - ENGINE/ENGINE BLOCK/VIBRATION
DAMPER - INSTALLATION)
(13) Install accessory drive belts. (Refer to 7 -
COOLING/ACCESSORY DRIVE/DRIVE BELTS -
INSTALLATION)
(14) Fill cooling system. (Refer to 7 - COOLING -
STANDARD PROCEDURE)
INSTALLATION - CRANKSHAFT SPROCKET
CAUTION: To ensure proper installation depth of
crankshaft sprocket, Special Tool 6641 must be
used.
(1) Install crankshaft sprocket using Special Tools
6641 and C-4685-C1 (Fig. 158).
(2) Install timing belt. (Refer to 9 - ENGINE/
VALVE TIMING/TIMING BELT/CHAIN AND
SPROCKETS - INSTALLATION)
Fig. 158 CRANKSHAFT SPROCKET INSTALLATION
1 - INSTALL WITH SPECIAL TOOL 6641 WITH 12mm SCREW
C-4685–C1 AND THRUST BEARING AND WASHER
LH ENGINE 3.5L 9 - 177
TIMING BELT AND SPROCKETS (Continued)
To Next Page
Loading...
