FRAME
SPECIFICATIONS
FRAME DIMENSIONS
Frame dimensions are listed in metric scale then
converted to inch scale listed in parenthesis. All
dimensions are from center to center of Principal
Locating Point (PLP), or from center to center of PLP
and fastener location. Vertical dimensions can be
taken from the work surface to the locations indi-
cated.
INDEX
DESCRIPTION FIGURE
ENGINE COMPARTMENT TOP VIEW 11
ENGINE COMPARTMENT SIDE VIEW 12
FORWARD FRAME SECTION AND ENGINE CRADLE 13
REAR FRAME SECTION 14
LH FRAME & BUMPERS 13 - 5
To Next Page
Loading...
