AIR CLEANER ELEMENT
REMOVAL
(1) Remove air cleaner lid. Lift lid off of air cleaner
housing.
(2) Remove filter element (Fig. 10).
INSTALLATION
(1) If necessary, clean the inside of the air cleaner
housing.
(2) Install new filter element (Fig. 10).
(3) Place lid over air cleaner housing.
Pressure Gauge C-3292
Adapter 8406
DRBIII
T
with PEP Module – OT-CH6010A
Pressure Transducer CH7059
Adaptor 8116
Cooling System Tester 7700
Combustion Leak Tester C-3685-A
Fig. 10 Air Cleaner Housing and Element
1 - AIR FILTER ELEMENT
LH ENGINE 2.7L 9 - 23
ENGINE 2.7L (Continued)
To Next Page
Loading...
