3. Remove the protective cover from the new ink cartridge.3.
4. If the cartridge is new, clean the electrical contacts with an ethanol wipe, to remove4.
corrosion protection.
Note Cleaning wipe part number: EPT039697
5.
Use a new/clean lint-free cloth to wipe the ink cartridge nozzles at a 45° angle.5.
Note The 45° angle stops debris from one nozzle contaminating the next nozzle.
CAUTION Sensitive Equipment. Risk of Equipment Damage.
Do not use an ethanol wipe or any other chemical to clean the cartridge
nozzles.
Use a new/clean lint-free cloth. If chemicals are used to clean the cartridge, the
nozzles may be damaged.
6.
Insert the ink cartridge into the print head and close the print head latch.
6.
MAINTENANCE & TROUBLESHOOTING
EPT077343 EN - Issue 1 - 11 November 2022 159
To Next Page
Loading...
Need help?
General
