PART 4 OPERATION
START UP
WARNING Hazardous Chemicals. Risk of eye and skin damage.
Wear protective equipment such as gloves and glasses when near
the printer.
Contact with chemicals can cause skin or eye damage.
Refer to Safety Data Sheet.
CAUTION Fragile Electrical Contacts. Risk of Equipment Damage.
Do not force the cartridge into the print head.
Be careful when inserting the cartridge. Forcing the cartridge against the
electrical contacts can break the contacts on the print head circuit board.
To start up the printer:
1. Remove the protective cover from the ink cartridge.1.
2. If the cartridge is new, clean the electrical contacts with an ethanol wipe, to remove2.
corrosion protection.
Note Cleaning wipe part number: EPT039697
3.
Use a new/clean lint-free cloth to wipe the ink cartridge nozzles at a 45° angle.
3.
Note
The 45° angle stops debris from one nozzle contaminating the next nozzle.
OPERATION
98 EPT077343 EN - Issue 1 - 11 November 2022
To Next Page
Loading...
Need help?
General
