Realtime
Enable this setting to encode the label template and send the data to the print head in real time.
The default reset time value is 1 second. This means the data will be updated every second. The
reset time value is set in seconds. The range for this setting is 1 to 60 seconds.
To enable Realtime:
1. From the Home screen, select the Settings icon:
1.
2. Select the System Settings icon: 2.
3.
Turn Realtime On.
3.
4. Adjust the Reset time (s) setting to set how often the data will be updated in seconds.4.
INSTALLATION
EPT077343 EN - Issue 1 - 11 November 2022 71
To Next Page
Loading...
