CONTROLLER ELECTRICAL SUPPLY
WARNING Electricity. Risk of injury.
Turn o the equipment and disconnect the power supply before
disconnecting or making electrical connections.
When powered on, the controller contains live electrical components.
Physical contact with live electrical components can result in an electric
shock.
WARNING Obstacle Hazard. Risk of Injury.
Do not install the equipment, cables, conduits or accessories in a
walkway, or in a location where they may cause an obstacle
hazard.
If the equipment, cables, conduits or accessories are installed in a
walkway, or in location where they may cause an obstacle hazard,
injury to personnel may occur.
CAUTION Electricity. Risk of damage to equipment.
Turn o the equipment and disconnect the power supply before
disconnecting or making electrical connections.
When powered on, the equipment contains live electrical components.
An incorrect electrical connection can damage the equipment.
Connect the controller and electrical power adapter to a power supply using a suitable plug and
socket outlet. Make sure the power supply is accessible and close to the equipment, so it can be
quickly disconnected. If a fused power connector is used, fit it with a 5 A fuse. If a fused power
connector is not used, a circuit breaker or fuse rated at 5 A is required.
The supply must be free from electrical noise. Domino can give advice on suitable devices to
ensure trouble-free operation.
Only use the electrical power supply adapter listed below:
•
Manufacturer: MEAN WELL ENTERPRISES CO. LTD
•
•
Model: GST60A24
•
INSTALLATION
EPT077343 EN - Issue 1 - 11 November 2022 53
To Next Page
Loading...
Need help?
General
