Domino G Series User Manual

Bi-Direction
Bi-Direction printing lets the the print direction change from "left to right", and then "right to left".
Use the Forward oset (mm) setting [5] to set to the printing position for "left to right". See,
Alignment on page 62.
Use the Reverse oset (mm) setting [6] to be set to the printing position for "right to left". See,
Alignment on page 62.
ABC
ABC
1
2
3
4
5
6
# Description
1 Print head/production line direction (Left to Right).
2 Print head/production line direction (Right to Left).
3 Sensor mark 1
4 Sensor mark 2
5 Forward oset (mm) setting
6 Reverse oset (mm) setting
To enable Bi-Direction mode:
1. From the Home screen, select the Settings icon: 1.
2. Select the System Settings icon: 2.
3.
Turn Bi-Direction On.
3.
4.
Adjust the Time value, to set the number of prints that will be made before the print
4.
direction changes.
INSTALLATION
EPT077343 EN - Issue 1 - 11 November 2022 67

Domino G Series Specifications

General

Brand	Domino
Model	G Series
Category	Laboratory Equipment
Language	English