INK CARTRIDGE INSTALLATION
WARNING Hazardous Chemicals. Risk of eye and skin damage.
Wear protective equipment such as gloves and glasses when near
the printer.
Contact with chemicals can cause skin or eye damage.
Refer to Safety Data Sheet.
CAUTION Fragile Electrical Contacts. Risk of Equipment Damage.
Do not force the cartridge into the print head.
Be careful when inserting the cartridge. Forcing the cartridge against the
electrical contacts can break the contacts on the print head circuit board.
To install an ink cartridge:
1. Remove the protective cover from the ink cartridge.1.
2. If the cartridge is new, clean the electrical contacts with an ethanol wipe, to remove2.
corrosion protection.
Note Cleaning wipe part number: EPT039697
3.
Use a new/clean lint-free cloth to wipe the ink cartridge nozzles at a 45° angle.
3.
Note
The 45° angle stops debris from one nozzle contaminating the next nozzle.
CAUTION Sensitive Equipment. Risk of Equipment Damage.
Do not use an ethanol wipe or any other chemical to clean the cartridge
nozzles.
Use a new/clean lint-free cloth. If chemicals are used to clean the cartridge, the
nozzles may be damaged.
INSTALLATION
EPT077343 EN - Issue 1 - 11 November 2022 51
To Next Page
Loading...
Need help?
General
