Auto Switch Channel
Note This setting is not available, if High speed is enabled.
This setting will automatically change the row of nozzles that is used for printing.
To enable and setup auto switch channel:
1.
From the Home screen, select the Settings icon:
1.
2. Select the System Settings icon:
2.
3. Turn Auto switch channel On3.
4. Adjust the Prints per channel value, to set how many prints will be made using 1 side4.
before switching to the other side (Range: 2-255).
High Speed
Note
Enabling this setting will disable Auto switch channel.
High speed lets the printer print at high speed resolution. When this setting is enabled, the
printing speed can be doubled compared to normal resolution.
To enable high speed:
1. From the Home screen, select the Settings icon: 1.
2. Select the System Settings icon: 2.
3. Turn High speed On.3.
INSTALLATION
68 EPT077343 EN - Issue 1 - 11 November 2022
To Next Page
Loading...
Need help?
General
