PART 3 INSTALLATION
UNPACKING
Remove the controller, print heads and accessories (e.g. encoder and sensor) from the
packaging.
The equipment delivered will vary according to the specific order. Check the contents of the
shipment against the packing list and report any dierences to Domino.
LOCATION
Position the equipment:
• Where they are electrically isolated from other equipment.•
• Where the temperature remains within the specified range, see Specification on page 22.•
•
Where the relative humidity remains within the specified range, see Specification on page•
22.
• Close to an accessible power outlet, to ensure power can be disconnected quickly.•
• Where access to pipes, cables and electrical connections is not blocked.•
INSTALLATION
38 EPT077343 EN - Issue 1 - 11 November 2022
To Next Page
Loading...
