Item Description
ARP Table This table is the LAN ARP table of this router. The
information for IP and MAC will be displayed in this field.
Each pair of IP and MAC address listed in ARP table can be
selected and added to IP Bind List by clicking Add below.
Select All Click this link to select all the items in the ARP table.
Sort Reorder the table based on the IP address.
Refresh Refresh the ARP table listed below to obtain the newest
ARP table information.
Add or Update IP Address – Type the IP address that will be used for the
specified MAC address.
Mac Address – Type the MAC address that is used to bind
with the assigned IP address.
Comment – Type a brief description for the entry.
Add It allows you to add the one you choose from the ARP table
or the IP/MAC address typed in Add and Edit to the table of
IP Bind List.
Update It allows you to edit and modify the selected IP address and
MAC address that you create before.
Delete You can remove any item listed in IP Bind List. Simply click
and select the one, and click Delete. The selected item will
be removed from the IP Bind List.
IP Bind List It displays a list for the IP bind to MAC information.
Backup Store the configuration for Bind IP to MAC as a file.
Restore Restore the previously stored configuration file and apply to
such page.
Info Before you select Strict Bind, you have to bind one set of IP/MAC address
for one PC. If not, no one of the PCs can access into Internet. And the web
user interface of the router might not be accessed.
When you finish the configuration, click OK to save the settings.
Vigor2762 Series User’s Guide
To Next Page
Loading...
Need help?
General
