VI-2-2 Bandwidth Limit
VI-2-2 Bandwidth Limit
In the Bandwidth Management menu, click Bandwidth Limit to open the web page.
To activate the function of limit bandwidth, simply click Enable and set the default
upstream and downstream limit.
Available settings are explained as follows:
Item Description
Bandwidth Limit Enable - Click this button to activate the function of limit
bandwidth.
IP Routed Subnet – Check this box to apply the
bandwidth limit to the second subnet specified in
LAN>>General Setup.
Disable - Click this button to close the function of limit
bandwidth.
Default TX limit - Define the default speed of the upstream
for each computer in LAN.
Default RX limit - Define the default speed of the
downstream for each computer in LAN.
Limitation List Display a list of specific limitations that you set on this web
page.
Vigor2762 Series User’s Guide