Draytek Vigor2762 series User Manual

Web User Interface
Web User Interface
II-1-1 General Setup
II-1-1 General Setup
This section will introduce some general settings of Internet and explain the connection
modes for WAN1, WAN2 and WAN3/WAN4 in details.
This router supports multiple-WAN function. If any connection problem occurrs on one of
the ISP connections, traffic will be guided and switched to the backup Internet connection
until it resumes connectivity.
This webpage allows you to set general setup for WAN1, WAN2, WAN3 and WAN4
respectively. In default, WAN2 is disabled. If you want to enable it, simply click the WAN2
link and select Yes in the field of Enable.
Available settings are explained as follows:
Item Description
Index Click the WAN interface link under Index to access into the
WAN configuration page.
Enable V means such WAN interface is enabled and ready to be
used.
Physical Mode / Type Display the physical mode and physical type of such WAN
interface.
Active Mode Display whether such WAN interface is Active device or
backup device.
After finished the above settings, click OK to save the settings.
Vigor2762 Series User’s Guide
51

Draytek Vigor2762 series Specifications

General

Brand	Draytek
Model	Vigor2762 series
Category	Network Router
Language	English